Interior Comfort; Audio System; Preset channel tuning- Page 173

6-23

Interior Comfort

Audio System

Form No. 8R65-EA-03C

Manual tuning

Turning the manual tuning dial will 
change the frequency higher or lower.

Seek tuning

Pressing the seek tuning button (

, 

) 

will cause the tuner to seek a higher or 
lower frequency automatically.

Scan tuning

Press the scan button (

, 

) to 

automatically sample strong stations. 
Scanning stops at each station for about 
5 seconds. To hold a station, press the 
scan button (

, 

) again during this 

interval.

Preset channel tuning

The 6 preset channels can be used to store 
6 AM and 12 FM stations.

1. To set a channel first select AM, FM1, 

or FM2. Tune to the desired station.

2. Depress a channel preset button for 

about 2 seconds until a beep is heard. 
The preset channel number and station 
frequency will be displayed. The 
station is now held in the memory.

3. Repeat this operation for the other 

stations and bands you want to store. 
To tune one in the memory, select AM, 
FM1, or FM2 and then press its 
channel preset button. The station 
frequency and the channel number will 
be displayed.

Auto memory tuning

This is especially useful when driving in 
an area where the local stations are not 
known. Additional AM/FM stations can 
be stored without disturbing the 
previously set channels.

Press and hold the auto memory button 
(

) for about 2 seconds until a beep 

is heard; the system will automatically 
scan and temporarily store up to 6 stations 
with the strongest frequencies in each 
selected band in that area.

After scanning is completed, the station 
with the strongest frequency will be tuned 
and its frequency displayed.
Press and release the auto memory button 
(

) to recall stations from the auto-

stored stations. One stored station will be 
selected each time; its frequency and 
channel number will be displayed.

NOTE

If you continue to press and hold the 
button, the frequency will continue 
changing without stopping.

NOTE

If the power supply is interrupted (fuse 
blows or the battery is disconnected), 
the preset channels will be canceled.

NOTE

If no stations can be tuned after 
scanning operations, "A" will be 
displayed.

J60E_8R65-EA-03C_Edition6.book  Page 23  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI