Owner Maintenance; Maintenance and Care- Page 247

8-21

Maintenance and Care

Owner Maintenance

Form No. 8R65-EA-03C

1. Raise the wiper arm and turn the blade 

assembly to expose the plastic locking 
clip.
Compress the clip and slide the 
assembly downward; then lift it off the 
arm.

2. Hold the end of the rubber and pull 

until the tabs are free of the metal 
support.

3. Remove the metal stiffeners from the 

blade rubber and install them in new 
blades.

NOTE

To prevent damage to the wiper arm 
blades when raising both the driver and 
passenger side wiper arms, raise the 
driver side wiper arm first. Conversely, 
when setting down the wiper arms, set 
the passenger side wiper arm down 
first.

To prevent damage to the windshield, 
don

’

t let the wiper arm fall on it.

Push

Plastic locking clip

CAUTION

Pull out

Tab

Metal support

Stiffeners

J60E_8R65-EA-03C_Edition6.book  Page 21  Wednesday, December 10, 2003  4:24 PM

Black process 45.0

°

 240.0 LPI