Replacing lost Integrated Keyhead Transmitters (IKTs); How to reprogram your Integrated Keyhead Transmitters (IKTs); 2009 Tribute Hybrid- Page 98

2009 Mazda Tribute HEV Tribute Hybrid Owners Manual

Table of Contents

Driver Controls
Locks and Security
Seating and Safety Restraints
Tires, Wheels and Loading
TRAILER TOWING
Maintenance and Specifications
background image

To replace the battery:

1. Twist a thin coin in the slot of

the IKT near the key ring in
order to remove the battery
cover.

2. Do not wipe off any grease on

the battery terminals on the
back surface of the circuit
board.

3. Remove the old battery.

Note:

Please refer to local regulations when

disposing of transmitter batteries.

4. Insert the new battery. Refer to the instructions inside the IKT for

the correct orientation of the battery. Press the battery down to
ensure that the battery is fully seated in the battery housing cavity.

5. Snap the battery cover back onto the key.

Note:

Replacement of the battery will

not

cause the IKT to become

deprogrammed from your vehicle. The IKT should operate normally after
battery replacement.

Replacing lost Integrated Keyhead Transmitters (IKTs)

If you would like to have your Integrated Keyhead Transmitters
reprogrammed because you lost one, or would like to buy additional
IKTs, you can either reprogram them yourself, or take

all IKTs

to your

authorized dealer for reprogramming.

How to reprogram your Integrated Keyhead Transmitters (IKTs)

To program a new Integrated Keyhead Transmitter yourself, refer to

Programming spare keys

in the

SecuriLockā„¢ passive anti-theft

section of this chapter.

Note:

At least two IKTs are required to perform

this procedure yourself.

2009 Tribute Hybrid

(thv)

Owners Guide, 1st Printing
USA

(fus)

Locks and Security

98

Detailed Information for 2009 Mazda Tribute HEV Tribute Hybrid Owners Manual

Lists of information found in 2009 Mazda Tribute HEV Tribute Hybrid Owners Manual - Page 98

  • 1. Twist a thin coin in the slot of the IKT near the key ring in order to remove the battery cover.
  • 2. Do not wipe off any grease on the battery terminals on the back surface of the circuit board.
  • 3. Remove the old battery.
  • 4. Insert the new battery.
  • 5. Snap the battery cover back onto the key.

Related Documents for 2009 Mazda Tribute HEV Tribute Hybrid Owners Manual