Washing your vehicle; During winter months, it is especially important to wash the; vehicle on a regular basis. Large quantities of dirt and road salt- Page 206

2001 Mazda Tribute Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

4. On the wall or screen you will

observe a light pattern with a
distinct horizontal edge of high
intensity light towards the right.
If this edge is not at the
horizontal reference line, the
beam will need to be adjusted.

5. Locate the vertical adjuster on

the headlamp, then use a 7 mm
hex socket or T20 Torx driver to turn the adjuster either
counterclockwise (to adjust down) or clockwise (to adjust up)
aligning the upper edge of the light pattern up to the horizontal line.
After market photometric aimers are not recommended for use on
Mazda vehicles.

6. Move the opaque cloth to cover the right-hand headlamp and repeat

steps 4 and 5 for the left-hand headlamp.

7. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS

NON-ADJUSTABLE.

8. Close the hood and turn off the lamps.

CLEANING AND CARING FOR YOUR VEHICLE

Contact your local Mazda dealership for a list of Mazda-approved
cleaners, polishes and waxes.

Washing your vehicle

Wash your vehicle regularly with
cold or lukewarm water. Never use
strong detergents or soap. If your
vehicle is particularly dirty, use a
quality car wash detergent. Always
use a clean sponge, washing glove
or similar device and plenty of water
for best results. To avoid spots,
avoid washing when the hood is still
warm, immediately after or during
exposure to strong sunlight.

During winter months, it is especially important to wash the
vehicle on a regular basis. Large quantities of dirt and road salt
are difficult to remove and also cause damage to the vehicle.

Maintenance and care

206

Detailed Information for 2001 Mazda Tribute Owners Manual

Lists of information found in 2001 Mazda Tribute Owners Manual - Page 206

  • 4. On the wall or screen you will observe a light pattern with a distinct horizontal edge of high intensity light towards the right.
  • 5. Locate the vertical adjuster on the headlamp, then use a 7 mm hex socket or T20 Torx driver to turn the adjuster either counterclockwise (to adjust down) or clockwise (to adjust up) aligning the upper edge of the light pattern up to the horizontal line.
  • 6. Move the opaque cloth to cover the right-hand headlamp and repeat steps 4 and 5 for the left-hand headlamp.
  • 7. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE.
  • 8. Close the hood and turn off the lamps.