Starting autoset memory preset
1. Press the AM or FM1/2 control
to select a frequency.
2. Press and momentarily hold the
AUTO-M (Auto memory)
control. The system will beep.
3. When the first six strong
stations are filled, the strongest
station will start playing.
4. Press the AUTO-M (Auto memory) control to select from the stored
stations. One stored station will be selected and played each time
the control is pressed. The frequency and channel number will be
displayed.
NOTE:
If no stations can be tuned after scanning operations, A will
appear in the display.
NOTE:
If the power supply is interrupted, (fuse blows or the battery is
disconnected), the preset channels will be canceled.
Tape select (if equipped)
To begin tape play, insert a cassette tape into the cassette slot, with the
open edge facing the right. Once inserted, the cassette tape will
automatically begin play and TAPE will appear in the display. At the end
of the cassette tape, the unit will automatically reverse the cassette tape
play.
To begin tape play (with a tape
loaded into the audio system), press
the TAPE control. If there is not a
cassette tape in the cassette slot,
NO TAPE will flash in the display.
The cassette’s top side is playing when
is illuminated in the display.
The cassette’s bottom side is playing when
is illuminated in the
display.
NOTE:
When a metal tape is inserted, the player will automatically
compensate and MTL will appear in the display.
2004 Mazda Tribute
(j14)
Owners Guide (post-2002-fmt)
USA English
(fus)
Entertainment Systems
23