Cooling System; Vehicle Care; How to Inspect the Engine Air- Page 276

2014 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (12,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6014143) - 2014 - CRC - 8/14/13

10-12

Vehicle Care

How to Inspect the Engine Air
Cleaner/Filter

To inspect the air cleaner/filter,
remove the filter from the vehicle
and lightly shake the filter (away
from vehicle) to release loose dust
and dirt. If the filter remains covered
with dirt, a new filter is required.

To inspect or replace the engine air
cleaner/filter:

1. Air Duct Clamp

2. Electrical Connector

3. Screws

1. Loosen the air duct clamp (1).

2. Disconnect the electrical

connector (2).

3. Remove the screws (3) and lift

the cover assembly.

4. Inspect or replace the air

cleaner/filter.

5. Reverse Steps 1

4 to reinstall

the housing cover and reconnect
the electrical connector to the
sensor.

{

Warning

Operating the engine with the air
cleaner/filter off can cause you or
others to be burned. The air
cleaner not only cleans the air; it
helps to stop flames if the engine
backfires. Use caution when
working on the engine and do not
drive with the air cleaner/filter off.

{

Caution

If the air cleaner/filter is off, dirt
can easily get into the engine,
which could damage it. Always
have the air cleaner/filter in place
when you are driving.

Cooling System

The cooling system allows the
engine to maintain the correct
working temperature.

Detailed Information for 2014 Buick enclave Owner Manual

Lists of information found in 2014 Buick enclave Owner Manual - Page 276

  • 1. Air Duct Clamp 2.
  • 3. Screws 1.
  • 2. Disconnect the electrical connector (2).
  • 3. Remove the screws (3) and lift the cover assembly.
  • 4. Inspect or replace the air cleaner/filter.
  • 5. Reverse Steps 1 – 4 to reinstall the housing cover and reconnect the electrical connector to the sensor.