Exterior Mirrors; Convex Mirrors; Power Mirrors- Page 43

2015 Buick enclave Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (14,1)

Buick Enclave Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576029) - 2015 - CRC - 8/15/14

2-14

Keys, Doors, and Windows

3. After the engine has started, turn

the key to LOCK/OFF, and
remove the key.

4. Insert the key to be programmed

and turn it to the ON/RUN
position within five seconds of
the original key being turned to
the LOCK/OFF position.

The security light turns off once
the key has been programmed.

5. Repeat Steps 1

4 if additional

keys are to be programmed.

If the PASS-Key III+ key is lost or
damaged, see your dealer or a
locksmith to have a new key made.

The SERVICE THEFT
DETERRENT SYSTEM message
displays on the Driver Information
Center (DIC) when there is a
problem with the theft-deterrent
system. See

Security Messages on

page 5-35

for additional information.

Do not leave the key or device that
disarms or deactivates the
theft-deterrent system in the vehicle.

Exterior Mirrors

Convex Mirrors

{

Warning

A convex mirror can make things,
like other vehicles, look farther
away than they really are. If you
cut too sharply into the right lane,
you could hit a vehicle on the
right. Check the inside mirror or
glance over your shoulder before
changing lanes.

The passenger side mirror is convex
shaped. A convex mirror's surface is
curved so more can be seen from
the driver seat.

Power Mirrors

To adjust each mirror:

1. Press (1) or (2) to select the

mirror.

2. Press on the control pad to

adjust the mirror.

3. Press (1) or (2) again to deselect

the mirror.

Detailed Information for 2015 Buick enclave Owner Manual

Lists of information found in 2015 Buick enclave Owner Manual - Page 43

  • 3. After the engine has started, turn the key to LOCK/OFF, and remove the key.
  • 4. Insert the key to be programmed and turn it to the ON/RUN position within five seconds of the original key being turned to the LOCK/OFF position.
  • 5. Repeat Steps 1 – 4 if additional keys are to be programmed.
  • 1. Press (1) or (2) to select the mirror.
  • 2. Press on the control pad to adjust the mirror.
  • 3. Press (1) or (2) again to deselect the mirror.