Vehicle Care; Passenger Side Shown, Driver; Side Similar- Page 229

Buick Encore Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

12163005) - 2019 - crc - 9/17/18

228

Vehicle Care

Passenger Side Shown, Driver

Side Similar

1. High-Beam Headlamp
2. Low-Beam Headlamp

High-Beam Headlamp/
Low-Beam Headlamp

1. Open the hood. See

Hood

0

204

.

For the driver side, remove the
windshield washer bottle filler
neck by firmly pulling it
straight out.

2. Remove the headlamp bulb

access cover.

3. Turn the bulb counterclockwise

and pull straight back.

4. Disconnect the wiring harness

connector from the bulb.

5. Install the new bulb in the

headlamp assembly by turning
clockwise.

6. Reconnect the wiring harness

connector.

7. Install the headlamp bulb

access cover.

For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it
straight into the bottle. Ensure
that the filler neck clip engages
into the engine compartment
fuse block retainer.

Uplevel Headlamp Assembly

The uplevel model vehicle has LED
high-beam and low-beam
headlamps, a turn signal lamp, a
parking lamp, a DRL, a sidemarker
lamp, and lamps on the headlamp
assembly.