Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13555857) - 2020 - CRC - 2/25/19
Driving and Operating
191
automatically disengage. See
Traction Control/Electronic Stability
Control
. If a collision alert
occurs when cruise control is
activated, cruise control is
disengaged. See
. When
road conditions allow you to safely
use it again, cruise control can be
turned back on.
If the brakes are applied, cruise
control disengages.
5
:
Press to turn cruise control on
or off. A white indicator comes on in
the instrument cluster when cruise
control is turned on.
RES+ :
If there is a set speed in
memory, press briefly to resume to
that speed or press and hold to
accelerate. If cruise control is
already active, use to increase
vehicle speed.
SET
−
:
Press the control down
briefly to set the speed and activate
cruise control. If cruise control is
already active, use to decrease
vehicle speed.
*
:
Press to disengage cruise
control without erasing the set
speed from memory.
Setting Cruise Control
If the
5
button is on when not in
use, SET
–
or RES+ could get
pressed and go into cruise when not
desired. Keep the
5
button off
when cruise is not being used.
1. Press
5
to turn the cruise
system on.
2. Get to the desired speed.
3. Press and release SET
–
. The
desired set speed briefly
appears in the instrument
cluster.
4. Remove your foot from the
accelerator pedal.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See
.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or
*
is pressed, the
cruise control is disengaged without
erasing the set speed from memory.
Once the vehicle reaches about
40 km/h (25 mph) or more, press
RES+ up briefly. The vehicle returns
to the previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated: