Vehicle Care; Checking Coolant; Coolant Surge Tank- Page 246

2020 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
09-Vehicle Care_en_US
background image

Buick Envision Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

13555857) - 2020 - CRC - 3/12/19

Vehicle Care

245

.

Helps keep the proper engine
temperature.

Caution

Do not use anything other than a
mix of DEX-COOL coolant that
meets GM Standard
GMW3420 and clean, drinkable
water. Anything else can cause
damage to the engine cooling
system and the vehicle, which
would not be covered by the
vehicle warranty.

Never dispose of engine coolant by
putting it in the trash, pouring it on
the ground, or pouring it into
sewers, streams, or bodies of water.
Have the coolant changed by an
authorized service center, familiar
with legal requirements regarding
used coolant disposal. This will help
protect the environment and your
health.

Checking Coolant

The vehicle must be on a level
surface when checking the coolant
level.

It is normal to see coolant moving in
the upper coolant hose return line
when the engine is running.

Check to see if coolant is visible in
the coolant surge tank. If the coolant
inside the coolant surge tank is
boiling, do not do anything else until
it cools down.

If coolant is visible but the coolant
level is not at or above the mark
pointed to, add a 50/50 mixture of
clean, drinkable water and
DEX-COOL coolant.

Be sure the cooling system is cool
before this is done.

If no coolant is visible in the coolant
surge tank, add coolant as follows:

How to Add Coolant to the
Coolant Surge Tank

{

Warning

Steam and scalding liquids from a
hot cooling system are under
pressure. Turning the pressure
cap, even a little, can cause them
to come out at high speed and
you could be burned. Never turn
the cap when the cooling system,
including the pressure cap, is hot.
Wait for the cooling system and
pressure cap to cool.

{

Warning

Plain water, or other liquids such
as alcohol, can boil before the
proper coolant mixture will. With
plain water or the wrong mixture,
the engine could get too hot but
there would not be an overheat
warning. The engine could catch
fire and you or others could be
burned.