Windshield Replacement; Vehicle Care; Rear Wiper Blade Replacement- Page 271

2021 Buick Envision Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

02-Seats and Restraints_en_US
04-Instruments and Controls_en_US
08-Driving and Operating_en_US
Driving and Operating
09-Vehicle Care_en_US
background image

Buick E2UB-N Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

14583509) - 2021 - CRC - 1/8/21

270

Vehicle Care

2. Lift up on the latch in the middle of the

wiper blade where the wiper arm
attaches.

3. With the latch open, pull the wiper blade

down toward the windshield far enough
to release it from the J-hooked end of
the wiper arm.

4. Remove the wiper blade.
5. Reverse Steps 1

3 for wiper blade

replacement.

Rear Wiper Blade Replacement

To replace the wiper blade:

1. Lift the wiper arm away from the

windshield.

2. While holding the wiper arm, press down

at the end of the wiper blade
assembly (1) where it attaches to the
wiper arm (2) to remove the wiper bade
assembly from the wiper arm.

3. Align the new wiper blade assembly (1)

with the wiper arm (2) and install by
pushing up on the wiper blade assembly
until it clicks into place on the
wiper arm.

Windshield Replacement

HUD System

If equipped, the windshield is part of the
HUD system. If the windshield must be
replaced, get one that is designed for HUD
or the HUD image may look out of focus.

Driver Assistance Systems

If the windshield needs to be replaced and
the vehicle is equipped with a front camera
sensor for the Driver Assistance Systems,
GM replacement windshield is
recommended. The replacement windshield
must be installed according to GM

Detailed Information for 2021 Buick Envision Owner Manual

Lists of information found in 2021 Buick Envision Owner Manual - Page 271

  • 2. Lift up on the latch in the middle of the wiper blade where the wiper arm attaches.
  • 3. With the latch open, pull the wiper blade down toward the windshield far enough to release it from the J-hooked end of the wiper arm.
  • 4. Remove the wiper blade.
  • 5. Reverse Steps 1 – 3 for wiper blade replacement.
  • 1. Lift the wiper arm away from the windshield.
  • 2. While holding the wiper arm, press down at the end of the wiper blade assembly (1) where it attaches to the wiper arm (2) to remove the wiper bade assembly from the wiper arm.
  • 3. Align the new wiper blade assembly (1) with the wiper arm (2) and install by pushing up on the wiper blade assembly until it clicks into place on the wiper arm.