Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps; Vehicle Care; Taillamps, Turn Signal,- Page 373

2012 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (35,1)

Buick LaCrosse Owner Manual - 2012

Vehicle Care

10-35

To replace one of these bulbs:

1. Open the hood. See

Hood on

page 10

5

.

A. DRL Lamp

B. Parking/Turn Signal Lamp

2. Turn the bulb socket

counterclockwise to remove it
from the headlamp assembly.

3. Pull the bulb straight out from

the socket.

4. Push the new bulb into the

socket and reinstall the socket
into the headlamp assembly by
turning it clockwise.

Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps

A. Back

Up Lamp

B. Turn Signal Lamp

To replace one of these lamps:

1. Open the trunk. See

Trunk on

page 2

13

.

2. Remove the fasteners and pull

back the trunk trim.

3. Remove the four plastic wing

nuts holding the taillamp
assembly in place.

4. Pull out the taillamp assembly

and disconnect the wiring
harness.

5. Turn the bulb socket

counterclockwise to remove it.

6. Pull the old bulb straight out of

the bulb socket.

7. Reverse Steps 1 through 6 to

install.

Detailed Information for 2012 Buick LaCrosse Owner Manual

Lists of information found in 2012 Buick LaCrosse Owner Manual - Page 373

  • 1. Open the hood.
  • 2. Turn the bulb socket counterclockwise to remove it from the headlamp assembly.
  • 3. Pull the bulb straight out from the socket.
  • 4. Push the new bulb into the socket and reinstall the socket into the headlamp assembly by turning it clockwise.
  • 1. Open the trunk.
  • 2. Remove the fasteners and pull back the trunk trim.
  • 3. Remove the four plastic wing nuts holding the taillamp assembly in place.
  • 4. Pull out the taillamp assembly and disconnect the wiring harness.
  • 5. Turn the bulb socket counterclockwise to remove it.
  • 6. Pull the old bulb straight out of the bulb socket.
  • 7. Reverse Steps 1 through 6 to install.