License Plate Lamp; Replacement Bulbs; Vehicle Care- Page 374

2012 Buick LaCrosse Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
Customer Information
background image

Black plate (36,1)

Buick LaCrosse Owner Manual - 2012

10-36

Vehicle Care

License Plate Lamp

The license plate lamps for this
vehicle are on the trunk lid.

To replace one of these bulbs:

1. Open the trunk. See

Trunk on

page 2

13

for more information.

2. Push the end on either of the

lamp assemblies (passenger
side shown) and then move the
lamp assembly down to remove
it from the trunk lid.

A. Bulb Socket

B. Bulb

C. Lamp Assembly

3. Turn the bulb socket (A)

counterclockwise to remove it
from the lamp assembly (C).

4. Pull the bulb (B) straight out of

the bulb socket.

5. Push the replacement bulb

straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.

6. Move the lamp assembly into

the trunk lid, engaging the clip
side first.

7. Push on the lamp side opposite

the clip until the lamp assembly
snaps into place.

Replacement Bulbs

Exterior Lamp

Bulb

Number

Back-Up Lamp

921LL

Daytime Running
Lamp (Uplevel)

3157K LCP

Front Turn Signal/
Parking Lamp

3757NAK

LCP

Headlamp High
Beam (Base)

H9

Headlamp Low
Beam (Base)

H11LL

License Plate Lamp

W5WLL

Rear Turn Signal

3757NAK

LCP

For replacement bulbs not listed
here, contact your dealer.

Detailed Information for 2012 Buick LaCrosse Owner Manual

Lists of information found in 2012 Buick LaCrosse Owner Manual - Page 374

  • 1. Open the trunk.
  • 2. Push the end on either of the lamp assemblies (passenger side shown) and then move the lamp assembly down to remove it from the trunk lid.
  • 3. Turn the bulb socket (A) counterclockwise to remove it from the lamp assembly (C).
  • 4. Pull the bulb (B) straight out of the bulb socket.
  • 5. Push the replacement bulb straight into the bulb socket and turn the bulb socket clockwise to install it into the lamp assembly.
  • 6. Move the lamp assembly into the trunk lid, engaging the clip side first.
  • 7. Push on the lamp side opposite the clip until the lamp assembly snaps into place.