Headlamp Aiming; To make sure your headlamps are aimed; properly, read all the instructions before- Page 270

yellow

blue     

6-34

6. Push the new bulb straight onto the retainer.

7. Reverse these steps to replace the bulb assembly.

Headlamp Aiming

Your vehicle has a headlamp system equipped with
horizontal and vertical aim indicators. The aim has been
pre

-

set at the factory and should need no further

adjustment. This is true even though your vertical and
horizontal aim indicators may not fall exactly on the 
“0” (zero) marks on their scales.

If your vehicle is damaged in an accident, the headlamp
aim may be affected. Aim adjustment may be necessary
if it is difficult to see lane markers (for horizontal aim),
or if oncoming drivers flash their high beams at you (for
vertical aim). If you believe your headlamps need to be
re

-

aimed, we recommend that you take it to your dealer

for service; however, it is possible for you to re

-

aim

your headlamps as described in the following procedure.

NOTICE:

To make sure your headlamps are aimed
properly, read all the instructions before
beginning. Failure to follow these instructions
could cause damage to headlamp parts.