Do not cover a headlamp to improve; beam cut-off when aiming. Covering a; headlamp may cause excessive heat build-up- Page 378

2007 Buick Lucerne Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

Seats and Restraint Systems
Features and Controls
Instrument Panel
Service and Appearance Care
background image

Headlamp aiming is done with the vehicle’s
low-beam headlamps. The high-beam headlamps
will be correctly aimed if the low-beam headlamps
are aimed properly.

To adjust the vertical aim, do the following:

1. Open the hood. See

Hood Release on

page 333

for more information.

2. Locate the aim dot on the lens of the

low-beam headlamp.

3. Measure the distance from the ground to the

aim dot on the low-beam headlamp. Record
the distance.

4. At the wall measure from the ground

upward (A) to the recorded distance
from Step 3 and mark it.

5. Draw or tape a horizontal line (B) on the wall

the width of the vehicle at the height of the
mark in Step 4.

Notice:

Do not cover a headlamp to improve

beam cut-off when aiming. Covering a
headlamp may cause excessive heat build-up
which may cause damage to the headlamp.

378

Detailed Information for 2007 Buick Lucerne Owner Manual

Lists of information found in 2007 Buick Lucerne Owner Manual - Page 378

  • 1. Open the hood.
  • 2. Locate the aim dot on the lens of the low-beam headlamp.
  • 3. Measure the distance from the ground to the aim dot on the low-beam headlamp.
  • 4. At the wall measure from the ground upward (A) to the recorded distance from Step 3 and mark it.
  • 5. Draw or tape a horizontal line (B) on the wall the width of the vehicle at the height of the mark in Step 4.

Related Documents for 2007 Buick Lucerne Owner Manual