Jump Starting; Jump Starting (On-board with eAssist Only); Vehicle Care- Page 324

2015 Buick Regal Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (77,1)

Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576024) - 2015 - CRC - 9/15/14

Vehicle Care

10-77

{

Caution

When the compact spare is
installed, do not take the vehicle
through an automatic car wash
with guide rails. The compact
spare can get caught on the rails
which can damage the tire, wheel,
and other parts of the vehicle.

Do not use the compact spare on
other vehicles.

Do not mix the compact spare tire or
wheel with other wheels or tires.
They will not fit. Keep the spare tire
and its wheel together.

{

Caution

Tire chains will not fit the compact
spare. Using them can damage
the vehicle and the chains. Do not
use tire chains on the compact
spare.

Jump Starting

Jump Starting (On-board
with eAssist Only)

If the vehicle fails to crank, it may
be jump started by using the eAssist
battery to charge the 12-volt battery.
Use the following procedure to
activate the on-board jump start
using the DIC controls.

DIC Buttons

The vehicle may be equipped with
an ignition key or an electronic
keyless ignition with pushbutton
start.

Key Access

Place the ignition key in the ON/
RUN position and proceed as
follows:

1. Press

S

then scroll

y

or

z

until the Settings menu displays.

2. Press

V

to enter the

Settings menu.

3. Press

T

then scroll

y

or

z

until Jump Start displays.

4. Press

V

to activate the jump

start.

5. The system will then ask for

confirmation. If Yes is selected,
the jump start will begin and the
display will show WAIT TO
START.

Detailed Information for 2015 Buick Regal Owner Manual

Lists of information found in 2015 Buick Regal Owner Manual - Page 324

  • 1. Press S then scroll y or z until the Settings menu displays.
  • 2. Press V to enter the Settings menu.
  • 3. Press T then scroll y or z until Jump Start displays.
  • 4. Press V to activate the jump start.
  • 5. The system will then ask for confirmation.