Vehicles Only); Keys, Doors, and Windows; Programming without a- Page 34

2014 Buick verano Owner Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

In Brief
Seats and Restraints
Instruments and Controls
Driving and Operating
Vehicle Care
background image

Black plate (6,1)

Buick Verano Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

6042574) - 2014 - crc - 10/18/13

2-6

Keys, Doors, and Windows

3. Insert the new key to be

programmed and turn it to the
ON/RUN position within
five seconds.

The security light will turn off
once the key has been
programmed.

4. Repeat Steps 1

3 if additional

keys are to be programmed.

If a key is lost or damaged, see your
dealer to have a new key made.

Programming without a
Recognized Transmitter (Key
Vehicles Only)

Program a new key to the vehicle
when a recognized key is not
available. Canadian regulations
require that owners see their dealer.

If there are no currently recognized
keys available, follow this procedure
to program the 1st key.

This procedure will take
approximately 30 minutes to
complete for the first key. The
vehicle must be off and all of the
keys you wish to program must be
with you.

1. Insert the new vehicle key into

the ignition.

2. Turn to ON/RUN. The security

light will come on.

3. Wait 10 minutes until the

security light turns off.

4. Turn the ignition to LOCK/OFF.

5. Repeat Steps 2

4 two more

times. After the third time, turn to
ON/RUN; the key is learned and
all previously known keys will no
longer work with the vehicle.

Remaining keys can be learned by
following the procedure in

Programming with a

Recognized Key.

Programming with a Recognized
Transmitter (Keyless Access
Vehicles Only)

A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
To program, the vehicle must be off
and all of the transmitters, both
currently recognized and new, must
be with you.

1. Place the recognized

transmitter(s) near you.

2. Insert the vehicle key of the new

transmitter into the key lock
cylinder on the outside of the
driver door and turn the key to
the unlock position five times
within 10 seconds.

The Driver Information Center
(DIC) displays READY FOR
REMOTE #2, 3, 4 or 5.

Detailed Information for 2014 Buick verano Owner Manual

Lists of information found in 2014 Buick verano Owner Manual - Page 34

  • 3. Insert the new key to be programmed and turn it to the ON/RUN position within five seconds.
  • 4. Repeat Steps 1 – 3 if additional keys are to be programmed.
  • 1. Insert the new vehicle key into the ignition.
  • 2. Turn to ON/RUN.
  • 3. Wait 10 minutes until the security light turns off.
  • 4. Turn the ignition to LOCK/OFF.
  • 5. Repeat Steps 2 – 4 two more times.
  • 1. Place the recognized transmitter(s) near you.
  • 2. Insert the vehicle key of the new transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds.

Related Documents for 2014 Buick verano Owner Manual