Daily Safety Check; 23 Daily Safety Check; Daily Safety Check 24- Page 13

Daily Safety Check

23  Daily Safety Check

Daily Safety Check   24

CHECK YOUR TRUCK BEFORE STARTING WORK

You must make sure your truck is safe to use. 

1.  Walk around your truck and check it over.

  • Check to make sure the battery is charged, water level 

  is OK and vent caps are in place. Don't use an open 

fl ame to check a battery. 

  • Make certain the battery retainer is properly installed. 

  • See that all wheels are in good condition.

  • Make sure all lights are working.

  • Check that both forks are secure and not bent, cracked
  or 

badly 

worn.

  • Inspect all lift chains for damage.

  • Look under the truck for signs of hydraulic leaks.

  • Inspect the seat belt for wear.

  • Turn the key to 

TEST

. See that the alarm and all

    indicator lights are working.  

  • Test the horn.

  • Make sure the power disconnect works.

2. Test drive your truck in an uncongested area.

• Adjust the operator seat and steering wheel to their  

most comfortable positions.

  • Fasten your seat belt.

  • Try all the hydraulic functions.

  • Check that the steering is easy and smooth.

  • Drive the truck slowly in both directions. 

  • Drive through the full speed range in both forward 

 and 

reverse.

  • Check braking and plugging distances in forward 

  and reverse. Load size and fl oor conditions can affect   

these distances.

  • Know the distance it takes to stop before you start

  working. If the braking distance is too long to stop 

    safely, don't drive the truck.

If anything doesn't look or feel right, don't drive the truck. Report the
problem to your supervisor.

You can get checklist forms from your Crown dealer 
(part no. OF-3772). Used properly, this checklist can alert 
service people to needed repairs.