Power On & Off; 13 Power On & Off; KEY SWITCH- Page 8

Power On & Off

13  Power On & Off

 Display  14

KEY SWITCH

Turn the key clockwise to turn the truck on.
Turn the key counter clockwise to turn the truck off.
Always turn the key off when leaving the truck.

POWER-ON PEDAL

Step down on the right pedal (floorboard). If the key is 

turned to ON, the steering pump will start running and 

you can operate the truck.

Note:

 You much keep the power-on pedal down for 

power steering and traction to work.

ENTRY BAR

Always keep your feet in the operator area and clear of 

the entry bar.
If you put your foot on the entry bar while traveling, 

the alarm will sound and the truck will slow to a stop.

POWER DISCONNECT

Pull up on the battery connector to disconnect the 

battery and cut all power.
Always disconnect the battery any time the truck isn't 

working right. The key switch does not cut all power 

to the truck.
Don't use the truck if it's not working right. Report the 

problem to your supervisor.

Display

BATTERY CHARGE DISPLAY

The green bars show how much charge is left. Have 

the battery changed or recharged if the yellow light 

is flashing.

MESSAGE PANEL

Displays truck information such as: hours of 

operations, event codes along with instructions, 

battery charge and other data.

PERFORMANCE SETTING

Indicates the level that your company has    

programmed this truck to operate at.

SERVICE & OPTION BUTTONS

See your Service Manual.

EVENT LIGHT (OPERATOR CORRECTABLE)

The display shows the code for a detected event 

which the operator can correct. See the display for 

instructions.

SERVICE LIGHT (SERVICE REQUIRED)

The display shows the code for a detected event 

which requires service. Contact your supervisor or 

service department.