Power On & Off 22; 21 Power On & Off; Power On & Off- Page 12

Power On & Off   22

21  Power On & Off

Power On & Off

KEY SWITCH
  

• To start the truck, turn the key clockwise to TEST 

(yellow dot). Check that all display lights are 
working. 

• Let go of the key and it will return to ON (green dot).
 • When leaving the truck, turn the key counter-

clockwise to OFF (red dot) to shut the truck off.

USER CODE (PIN number)

You may have to enter a user code (Personal 
Identifi cation Number) before you can use the truck.  
Check the message display if the truck doesn't operate.

FOOT PEDALS/PAD
  

Place your right foot on either the pedestal sensor 
pedal or the fl oorboard sensor pad.  Place your left 
foot on one of the left brake pedals. Turn the key ON 
and lift your left foot for a moment to cycle the brake. 
Return your foot to the brake pedal.
Lift your right foot and return it to the sensor pad.

You must step on the center brake pedal on the 
pedestal with your left foot.  This allows the truck 
electronics to check brake pedal operation before you 
drive the truck.
The truck is ready for operation.
 

ENTRY BAR

Always keep your feet in the operator area and clear 
of the entry bar.

If you put your foot on the entry bar while traveling, 
the alarm will sound and the truck will slow to a stop. 

POWER DISCONNECT

Push the Power Disconnect button to cut power to the 
truck.

Use the Power Disconnect to shut the truck down any 
time it isn't working right.  Don't use the truck if it's not 
working right. Report the problem to your supervisor.

Turn the key switch to OFF and back to ON to reconnect 
the battery and reset the Power Disconnect button.