Display Panel 16; 15 Display ; Display Panel- Page 9

Display Panel   16

15 Display 

Panel

Display Panel

ENTER OR RETURN BUTTON

Use to navigate in and out 
of menus and select inputs.

NAVIGATION BUTTONS
  

Up, Down, Left and Right 
Arrows are used to scroll 
through menus.

FORKS DOWN LIGHT (see Caution)

The green fork means the mast is at its minimum collapsed height. Make certain load 
will clear overhead obstructions.

CAPACITY DATA MONITOR (see Caution)
• Fork height lights:  

A yellow fork will light to show which lift zone the forks are in.  

If any of these lights are on, it means the load backrest is higher than the collapsed 
height of the mast. Make certain the load and load backrest will clear any 
obstructions above you.

The yellow light will fl ash and alarm will "beep" if you travel faster than the load 
positioning speed (2.4 km/h, 

1.5 MPH

) while the load backrest is above the 

collapsed height of the mast.

• Max Lift height lights:  

The green bars will light to show how high, or to which lift zone 

you can raise the load.

Overload warning:  

If load is too heavy for the lift zone the forks are in, the alarm will 

"beep" and message display will read                                . Lower load carefully.

Caution:  

All information displayed by the fork position lights and/or the Capacity 

Data Monitor is for reference only. You must always be alert to load center, load 
distribution, load height and load weight. You must also be aware when the load or 
load backrest extends above the top of the mast, and how much overhead clearance 
is needed. 

MESSAGE PANEL

The upper half of the message panel shows percent of charge remaining in 
the battery, and indicators relating to truck operation and service.

Service required. Contact your supervisor or service department.

Operator alert. See bottom line for instructions.

Indicates that load back rest is above collapsed height of the mast.

Drive wheel direction and angle indicator.

Traction Control indicator (OnTrac

™

).

Indicates the level your company has programmed this truck to operate.

Indicates energy is being returned to the battery.

The bottom line of the message panel is usually blank. However if anything 
requires your attention, instructions will be displayed here.
Anytime you hear a beep, or if the truck slows down or won’t work, check 
message panel for instructions.

This line of the message panel shows selective truck information, when 
requested using the Service & Option Buttons. See your Service Manual.

CENTER   TRAVEL  HANDLE

198 In

SAMPLE

MESSA

GE

PANEL

REDUCE LIFT HEIGHT