Be a Safe Driver
continued
40
39 Be a Safe Driver
continued
Be a Safe Driver
continued
AVOID FALLS AND TIPOVERS
• Be extremely careful when working around dock or
ramps. Stay away from the edge.
• Check capacities. Be sure your truck, with load, isn't
too heavy for where you are driving.
• Make sure the load you are moving is stable. Spread
the forks as far as you can and center the load.
Insert the forks as far under the load as you can.
• Watch out for overhead obstructions.
• Turret trucks should not be used on ramps or grades.
If you must drive on a grade, travel slowly and never
turn the truck. If carrying a load, travel with forks
upgrade. If unloaded, travel with forks downgrade.
Keep the fork height below 300mm (12 inches).
• Stop your truck completely before getting off.
• Lower the forks to the floor. Turn the truck off or
disconnect the battery.
• Avoid parking on inclines. But if you must, block the
wheels of your truck.
WATCH OUT FOR OTHER PEOPLE
• Slow down. Yield or stop for pedestrians.
Use your horn when you come to a crosswalk
or intersection.
• Be careful that you don't pin or crush someone.
For example: Never drive your truck toward anyone
standing in front of a fixed object.
• Watch out for power unit and fork (load) swing
when turning.
• Never allow passengers on your truck.
• Keep others away from your truck while you're
working. Don't ever allow anyone on or under the
load or forks.
• Don't let anyone use your truck unless they are
trained and certified.
• Never lift anyone with the forks unless they are using
an approved platform. Even then use extreme caution:
• Use a securely attached and approved safety
platform.
• Make certain lifting mechanism is operating
properly.
• Make certain truck is in neutral and brake is applied.
• Lift and lower slowly.
• Watch for overhead obstructions.
• Be sure you can see and hear the person being lifted.
• Never transport anyone on a safety platform from
one location to another.