Protect
Yourself
Vehicle
Operation
Load
Handling
Vehicle
Maintenance
You & Your
Wave
®
Vehicle
Vehicle
Maintenance
Protect
Yourself
Vehicle
Operation
Load
Handling
You & Your
Wave
®
Vehicle
Know the Hazards
Charge Complete
Charging
Abnormal Charge
WARNING
This vehicle does not have
brakes, steering or travel
control when the switch is in
Push Mode.
Do not push vehicle while
operator is on platform.
Pushing speed must not
exceed 2 MPH.
Leaving the switch in Push Mode
may damage the battery.
Return switch to Drive Mode after
moving the vehicle.
Drive Mode
Push Mode
WARNING
Platform
Raise
Base
Lower
8300-001A
Note:
Service Panel
Continued
PUSH/DRIVE SWITCH
If for some reason your vehicle won’t drive,
put this switch in the Push Mode position.
This should release the brake so the vehicle
can be pushed. If it does not release,
contact your supervisor.
EMERGENCY DISCONNECT
Push down the red
Emergency Disconnect
button anytime your
vehicle isn’t working right.
Don’t use your vehicle.
Report the problem to
your supervisor.
No one may ride anywhere on the vehicle
while it is being pushed. Pushing speed
must not exceed 2 MPH.
Note:
RAISE & LOWER OVERRIDE SWITCHES
The switch on the lower left determines whether the operator
platform or this service panel has control of raise & lower.
If the left switch is on BASE, the right switch will control
raise and lower. The Raise & Lower buttons on the platform
won’t work until the left switch is placed back on PLATFORM.
If the Lowering button does not work, the
platform can be lowered by following the
instructions for operating a manual lowering
valve. Both the valve and the instructions
are located under the load deck.
DON’T LET THE OPERATOR GET HURT
Before you use the Raise/Lower override switches,
warn the operator to keep hands and feet inside the
operator area.
Don’t push the vehicle until the operator is off the
platform and the area is clear.
Page 34