Operation Manual; Integrated Processing Features; Input Mode- Page 11

Crown XTI 1002 User Manual

background image

XTi2 Series 

Power Amplifiers

page 11

Operation Manual

Integrated Processing Features

The XTi2 Series amplifiers include a number of integrated processing features which appear as icons on the front panel LCD 
screen. They are described below:

NOTE: System Architect Software is required to have full control over all Integrated Processing Features which can be 
downloaded from the following URL – http://hiqnet.harmanpro.com/. When controlling more than one XTi2 at a time 

you will need USB Hub. We recommend using a Powered USB Hub. 

Input Mode

t 4UFSFP*OUIJTNPEF$IBOOFMJOQVUHPFTUP$IBOOFMPVUQVUBOE$IBOOFMJOQVUHPFTUP$IBOOFMPVUQVU5IJTJT

the mode the amplifier is configured for from the factory.

t 46. $)$)o*OUIJTNPEFUIF$IBOOFMJOQVUTJHOBMBOE$IBOOFMJOQVUTJHOBMBSFTVNNFEBOEGFEUPCPUI

output channels. This provides a 6 dB level boost.

t *OQVU:o*OUIJTNPEFUIF$IBOOFMJOQVUTJHOBMJTTFOUUPUIF$IBOOFMBOE$IBOOFMPVUQVU5IFDIBOOFMJOQVU

signal is ignored.

Output Mode

t 4UFSFPo*OUIJTNPEFUIFBNQMJmFSTFOET$IBOOFMJOQVUTJHOBMUPUIF$IBOOFMPVUQVUBOEUIF$IBOOFMJOQVUTJHOBM

to the Channel 2 output.

t #SJEHF.POPo*OUIJTNPEFUIFQPXFSPGCPUIBNQMJmFSDIBOOFMTBSFEFMJWFSFEJOUPBTJOHMFPSPINMPBE

Subharmonic Synth

The Subharmonic Synth feature takes the low frequencies and “synthesizes” or creates new frequencies that are one octave 
lower. The two signals are then summed together. Also new, are two user adjustable parametric EQ filters and crossover 
frequency filter. These can be used to “shape” the sound and enhance the desired effect.

Equalization

The XTi2 Series provides two blocks of equalization in the signal processing. The input EQ block is before the crossover and 
is usually used for the room EQ.  The output EQ block is after the crossover and is usually used for speaking tuning.

Input EQ:

 This input EQ block provides 6 filters per channel each with frequency, gain, and Q that is user controllable. 

This block also has a High and Low Shelf Filter per channel which has gain and frequency control.

Output EQ:

 This output EQ block provides 8 filters per channel each with frequency, gain, and Q control that is user 

controllable.

Crossover:

The crossover section provides users with the ability to enable a HighPass and LowPass filter per channel along with 
BandPass gain and the ability to change the polarity. This allows the Crossover section to be customized to most system 
configurations.

For the HighPass and LowPass Filters, you have the choice of the following filters: Butterworth 6dB/oct, Butterworth 12dB/oct, 
Butterworth 18dB/oct, Butterworth 24dB/oct, Butterworth 48dB/oct, Linkwitz-Riley 24dB/oct, and Linkwitz-Riley 48dB/oct.

The BandPass gain provides you with -15dB to +15dB of gain.

Delay

There is up to 50msec of delay available in the signal processing for time aligning your speakers. The software allows you to 
enter the amount of delay needed in the form of seconds, feet, or meters and does the calculation for you.

Peak

X

 Plus Limiter:

Feed-forward output limiter with user-adjustable attack, release and threshold (0.1 dB resolution), plus integrated feedback 
limiter to minimize amplifier clipping.

Detailed Information for Crown XTI 1002 User Manual

Lists of information found in Crown XTI 1002 User Manual - Page 11

  • 46. $)$)o*OUIJTNPEFUIF$IBOOFMJOQVUTJHOBMBOE$IBOOFMJOQVUTJHOBMBSFTVNNFEBOEGFEUPCPUI output channels.

Related Documents for Crown XTI 1002 User Manual