Installing a LATCH-Compatible Child Seat- Page 71

Continued

69

uu

Child Safety

u

Safety of Infants and Small Children

Safe Driving

A LATCH-compatible child seat can be installed in either of the two outer rear seats. 
A child seat is attached to the lower anchors with either the rigid or flexible type of 
connectors.

1.

Locate the anchor marks affixed to the base 
of the seat cushion.

Pull out the anchor covers under the marks 
to expose the lower anchors.

2.

Place the child seat on the vehicle seat, then 
attach the child seat to the lower anchors 
according to the instructions that came 
with the child seat.

u

When installing the child seat, make sure 
that the lower anchors are not 
obstructed by the seat belt or any other 
object.

■

Installing a LATCH-Compatible Child Seat

1

Installing a LATCH-Compatible Child Seat

For your child’s safety, when using a child seat 
installed using the LATCH system, make sure that the 
child seat is properly secured to the vehicle. A child 
seat that is not properly secured will not adequately 
protect a child in a crash and may cause injury to the 
child or other vehicle occupants.

3

WARNING

Never attach two child seats to the same 
anchor. In a collision, one anchor may not 
be strong enough to hold two child seat 
attachments and may break, causing 
serious injury or death.

Marks

Covers

*

Models with anchor covers

Rigid Type

Lower Anchors

* Not available on all models

21 CIVIC 5D HUM-31TGG6400_01.book  69 ページ  ２０２０年８月２８日　金曜日　午後１時４８分