Installing a Child Seat with a Lap/Shoulder Seat Belt- Page 74

uu

Child Safety

u

Safety of Infants and Small Children

72

Safe Driving

A child seat can be installed with a lap/shoulder belt in any rear seat or, if absolutely 
necessary, the front passenger seat.

1.

Place the child seat on the vehicle seat.

2.

Route the seat belt through the child seat 
according to the seat manufacturer’s 
instructions, and insert the latch plate into 
the buckle.

u

Insert the latch plate fully until it clicks.

3.

Slowly pull the shoulder part of the belt all 
the way out until it stops. This activates the 
lockable retractor.

4.

Let the seat belt retract a few inches and 
check that the retractor has switched 
modes by pulling on the webbing. It should 
not pull out again until it is reset by 
removing the latch plate from the buckle.

u

If you are able to pull the shoulder belt 
out, the lockable retractor is not 
activated. Slowly pull the seat belt all the 
way out, and repeat steps 3 – 4.

■

Installing a Child Seat with a Lap/Shoulder Seat Belt

1

Installing a Child Seat with a Lap/Shoulder Seat Belt

A child seat that is not properly secured will not 
adequately protect a child in a crash and may cause 
injury to the child or other vehicle occupants.

21 CIVIC 5D HUM-31TGG6400_01.book  72 ページ  ２０２０年８月２８日　金曜日　午後１時４８分