Manual switching between high-beam and low-beam; Using the lever:; Using the light switch:- Page 190

189

uu

Operating the Switches Around the Steering Wheel

u

Auto High-Beam

Co
ntrols

■

Manual switching between high-beam and low-beam

If you want to manually switch the headlights between high beam and low beam, 
follow either of the procedures below. Note that when you do this, the auto high-
beam indicator will turn off and the auto high-beam will be deactivated.

Using the lever:

Pull the lever toward you for flashing the high beams then release it within about 
one second while driving.

u

To reactivate the auto high-beam, pull the lever toward you for flashing the 
high beams then release it while driving. The auto high-beam indicator will 
come on.

Using the light switch:

Turn the light switch to 

.

u

To reactivate the auto high-beam, turn the light switch to 

AUTO

 when the 

lever is in the low beam position, the auto high-beam indicator will come on.

1

How to Use the Auto High-Beam

If the 

Some driver assist systems cannot operate: 

Camera temperature too high

 message appears:

•

Use the climate control system to cool down the 
interior and, if necessary, also use defroster mode 
with the airflow directed toward the camera.

•

Start driving the vehicle to lower the windshield 
temperature, which cools down the area around 
the camera.

If the 

Some driver assist systems cannot operate: 

Clean front windshield or poor viewing 
conditions.

 message appears:

•

Park your vehicle in a safe place, and make sure the 
windshield is clean.
Clean the windshield if it is dirty. If the message 
does not disappear after driven for a while, have 
your vehicle checked by a dealer.

You can change the auto high-beam system on and 
off.

2

Settings

 P. 126

2

Customized Features

 P. 363