uu
Honda Sensing
®
u
Collision Mitigation Braking System
TM
(CMBS
TM
)
480
Driving
When you turn the CMBS
TM
on and off, do the
following.
1.
Press the safety support switch.
2.
Roll the left selector wheel to the
symbol and push it.
2.
Roll the right selector wheel to the
symbol and push it.
u
A message appears on the driver
information interface when the system
turns on or off.
u
A check mark appears in the box and the
color of the
symbol changes to green
when the system is on. The check mark
disappears and the color of the
symbol changes to gray when the system
is off.
The CMBS
TM
is turned on every time you start
the engine, even if you turned it off the last
time you drove the vehicle.
■
CMBS
TM
On and Off
1
Collision Mitigation Braking System
You cannot turn the CMBS
TM
off while driving.
The CMBS
TM
may automatically shut off, and the
safety support indicator (amber) will come and stay
on under certain conditions:
2
P. 481
The CMBS
TM
is not activated for about 15 seconds
after the engine starts.
You can also select safety support content from the
driver information interface.
2
2
Driver Information Interface (Right Side
Area)
P. 138
The Vehicle Stability Assist
TM
(VSA
®
) system, Vehicle
Stability Assist
TM
(VSA
®
)
OFF
, Adaptive Cruise Control
(ACC) with Low Speed Follow, low tire pressure/
TPMS
*
and safety support indicators may come on in
amber along with a message in the gauge when you
set the power mode to ON after reconnecting the
battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
Safety Support Switch
Left Selector
Wheel
Models with A-type meter
Models with A-type meter
Models with B-type meter
Right
Selector
Wheel
Safety Support
Switch
Models with B-type meter
* Not available on all models