How to activate the system; When the System can be Used- Page 520

Continued

519

uu

Honda Sensing

®

u

Lane Keeping Assist System (LKAS)

Driving

The system can be used when the following conditions are met.

•

The lane in which you are driving has detectable lane markers on both sides, and 
your vehicle is in the center of the lane.

•

The vehicle is traveling between about 45 and 90 mph (72 and 145 km/h).

•

You are driving on a straight or slightly curved road.

•

The turn signals are off.

•

The brake pedal is not depressed.

■

How to activate the system

1.

Press the LKAS button.

u

LKAS indicator (white) appears on the 
gauge.
The system is standby.

u

If traffic lane lines are detected, white 
lines appear on the gauge.

*1 : Models with A-type meter
*2 : Models with B-type meter

■

When the System can be Used

1

When the System can be Used

If the vehicle drifts toward either left or right lane line 
due to the system applying torque, turn off the LKAS 
and have your vehicle checked by a dealer.

Be sure to keep the following below to activate the 
system properly;

•

Always keep the windshield around the camera 
clean.

•

When cleaning the windshield, be careful not to 
apply windshield cleanser to the camera lens.

•

Do not touch the camera lens.

•

Do not attach a sticker to the area around the 
camera.

If LKAS button is pressed when the system can be 
used, LKAS is on without standby.

LKAS indicator 
(white)

White lines

White lines

LKAS indicator 
(white)

*1

*2

LKAS Button