

uu
Parking Your Vehicle
u
Cross Traffic Monitor
*
570
Driving
The system activates when:
•
The power mode is in ON.
•
The Cross Traffic Monitor is turned on.
2
Cross Traffic Monitor On and Off
•
The transmission is in
(
R
.
•
Your vehicle is moving at 3 mph (5 km/h) or 
lower.
When a vehicle is detected approaching from a rear corner, Cross Traffic Monitor 
alerts you with a buzzer and a displayed warning.
The system will not detect a vehicle that approaches from directly behind your 
vehicle, nor will it provide alerts about a detected vehicle when it moves directly 
behind your vehicle.
The system does not provide alerts for a vehicle that is moving away from your 
vehicle, and it may alert for pedestrians, bicycles, or stationary objects.
■
How the System Works
1
Cross Traffic Monitor may not detect or may delay 
alerting an approaching vehicle, or may alert without 
an approaching vehicle under the following 
conditions:
•
An obstacle, such as another vehicle and a wall, 
near your vehicle’s rear bumper, is blocking the 
radar sensor’s scope.
•
Your vehicle is moving at the speed of about 3 mph 
(5 km/h) or higher.
•
A vehicle is approaching at the speed other than 
between about 6 mph (10 km/h) and 16 mph (25 
km/h).
•
The system picks up external interference such as 
other radar sensors from another vehicle or strong 
radio wave transmitted from a facility nearby.
•
Either corner of the rear bumper is covered with 
snow, ice, mud or dirt.
•
When there is bad weather.
•
Your vehicle is on an incline.
•
Your vehicle is tilted due to a heavy load in the rear.
•
Your vehicle is reversing towards a wall, a pole, a 
vehicle, and so on.
The rear bumper or the sensors have been improperly 
repaired or the rear bumper has been deformed. 
Have your vehicle checked by a dealer.
For proper operation, always keep the rear bumper 
corner area clean.
Do not cover the rear bumper corner area with labels 
or stickers of any kind.
Radar sensors:
Underneath the rear bumper 
corners
* Not available on all models