Opening the Hood- Page 598

597

uu

Maintenance Under the Hood

u

Opening the Hood

Main

tenan

ce

Opening the Hood

1.

Park the vehicle on a level surface, and set 
the parking brake.

2.

Pull the hood release handle under the 
driver’s side lower corner of the dashboard.

u

The hood will pop up slightly.

3.

Push the hood latch lever (located under 
the front edge of the hood to the center) to 
the side and raise the hood. Once you have 
raised the hood slightly, you can release the 
lever.

4.

Remove the support rod from the clamp 
using the grip. Mount the support rod in 
the hood.

When closing, remove the support rod, and 
stow it in the clamp, then gently lower the 
hood. Remove your hand at a height of 
approximately 12 inches (30 cm) and let the 
hood close.

1

Opening the Hood

NOTICE

Do not open the hood when the wiper arms are 
raised. The hood will strike the wipers, resulting in 
possible damage to the hood and/or the wipers.

NOTICE

Do not press the engine cover forcibly. This may 
damage the engine cover and component parts.

When closing the hood, check that the hood is 
securely latched.

If the hood latch lever moves stiffly, or if you can 
open the hood without lifting the lever, the latch 
mechanism should be cleaned and lubricated.

Do not open the hood while the Auto Idle Stop 
function is activated.

3

WARNING

The hood support rod can become very hot 
due to heat from the engine.

To ensure against possible burns, do not 
handle the metal section of the rod: Use 
the foam grip instead.

2.0 L engine models

Hood Release Handle

Pull

Lever

Support Rod

Grip

Clamp