What to Do After the Engine Starts- Page 655

uu

If the Battery Is Dead

u

Jump Starting Procedure

654

Han

d

lin
g the U

n

expected

Once your vehicle’s engine has started, remove the jumper cables in the following 
order.

1.

Disconnect the jumper cable from your vehicle’s ground.

2.

Disconnect the other end of the jumper cable from the booster battery 

-

terminal.

3.

Disconnect the jumper cable from your vehicle’s battery 

+

 terminal.

4.

Disconnect the other end of the jumper cable from the booster battery 

+

terminal.

Have your vehicle inspected by a nearby service station or a dealer.

■

What to Do After the Engine Starts

1

What to Do After the Engine Starts

The Vehicle Stability Assist

TM

 (VSA

®

) system, Vehicle 

Stability Assist

TM

 (VSA

®

) 

OFF

, Adaptive Cruise Control 

(ACC) with Low Speed Follow, safety support and low 
tire pressure/ TPMS

*

 indicators may come on in amber 

along with a message in the gauge when you set the 
power mode to ON after reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h). 
Each indicator should go off. If any do not, have your 
vehicle checked by a dealer.

* Not available on all models