How To Engage The Automatic Locking Mode; How To Disengage The Automatic Locking Mode; Air Bag System Components- Page 114

2018 Jeep Wrangler JL User Guide

Table of Contents

background image

WARNING!

• Never place a rear-facing child restraint

in front of an air bag. A deploying pas-
senger front air bag can cause death or
serious injury to a child 12 years or
younger, including a child in a rear-
facing child restraint.

• Only use a rear-facing child restraint in

the rear seat of a vehicle with a rear seat.

How To Engage The Automatic Locking Mode

1. Buckle the combination lap and shoulder

belt.

2. Grasp the shoulder portion and pull down-

ward until the entire seat belt is extracted.

3. Allow the seat belt to retract. As the seat

belt retracts, you will hear a clicking
sound. This indicates the seat belt is now
in the Automatic Locking Mode.

How To Disengage The Automatic Locking Mode

Unbuckle the combination lap/shoulder belt
and allow it to retract completely to disen-
gage the Automatic Locking Mode and acti-
vate the vehicle sensitive (emergency) lock-
ing mode.

WARNING!

• The seat belt assembly must be replaced

if the switchable Automatic Locking Re-
tractor (ALR) feature or any other seat
belt function is not working properly
when checked according to the proce-
dures in the Service Manual.

• Failure to replace the seat belt assembly

could increase the risk of injury in colli-
sions.

• Do not use the Automatic Locking Mode

to restrain occupants who are wearing
the seat belt or children who are using
booster seats. The locked mode is only
used to install rear-facing or forward-
facing child restraints that have a har-
ness for restraining the child.

Supplemental Restraint Systems (SRS)

Some of the safety features described in this
section may be standard equipment on some
models, or may be optional equipment on
others. If you are not sure, ask an authorized
dealer.

The air bag system must be ready to protect
you in a collision. The Occupant Restraint
Controller (ORC) monitors the internal cir-
cuits and interconnecting wiring associated
with the electrical Air Bag System Compo-
nents. Your vehicle may be equipped with the
following Air Bag System Components:

Air Bag System Components

• Occupant Restraint Controller (ORC)

• Air Bag Warning Light

• Steering Wheel and Column

• Instrument Panel

• Knee Impact Bolsters

• Driver and Front Passenger Air Bags

• Seat Belt Buckle Switch

• Supplemental Side Air Bags

• Front and Side Impact Sensors

SAFETY

112

Detailed Information for 2018 Jeep Wrangler JL User Guide

Lists of information found in 2018 Jeep Wrangler JL User Guide - Page 114

  • 1. Buckle the combination lap and shoulder belt.
  • 2. Grasp the shoulder portion and pull down- ward until the entire seat belt is extracted.
  • 3. Allow the seat belt to retract.
  • Never place a rear-facing child restraint in front of an air bag.
  • Only use a rear-facing child restraint in the rear seat of a vehicle with a rear seat.
  • The seat belt assembly must be replaced if the switchable Automatic Locking Re- tractor (ALR) feature or any other seat belt function is not working properly when checked according to the proce- dures in the Service Manual.
  • Failure to replace the seat belt assembly could increase the risk of injury in colli- sions.
  • Do not use the Automatic Locking Mode to restrain occupants who are wearing the seat belt or children who are using booster seats.

Related Documents for 2018 Jeep Wrangler JL User Guide