2006 B-Series ; Locks and Security; CIMS #1258992- Page 59

2006 Mazda B3000 Truck B Series Truck Owners Manual

Model Year
2014 Dodge Charger SRT Owner Manual

Table of Contents

background image

JOBNAME: No Job Name PAGE: 59 SESS: 1 OUTPUT: Thu Sep 15 08:22:27 2005
/ford_pdm/ford/own2002/mbs/og

To reprogram the remote entry
transmitters:

1. Ensure the vehicle is

electronically unlocked.

2. Put the key in the ignition.

3. Turn the key from the 2

(LOCK) position to 3 (OFF).

4. Cycle eight times rapidly (within

10 seconds) between the 3
(OFF) position and 4 (ON).

Note:

The eighth turn must end in the 4 (ON) position.

5. The doors will lock, then unlock, to confirm that the programming

mode has been activated.

6. Within 20 seconds press any button on the remote entry transmitter.

Note:

If more than 20 seconds have passed you will need to start

the procedure over again.

7. The doors will lock, then unlock, to confirm that this remote entry

transmitter has been programmed.

8. Repeat Step 6 to program each additional remote entry transmitter.

9. Turn the ignition to the 3 (OFF) position after you have finished

programming all of the remote entry transmitters.

Note:

After 20

seconds, you will automatically exit the programming mode.

10. The doors will lock, then unlock, to confirm that the programming

mode has been exited.

Illuminated entry

The interior lamps illuminate when the remote entry system is used to
unlock the door(s) or sound the personal alarm.

The illuminated entry system will turn off the interior lights if:

the ignition switch is turned to the ON position, or

the remote transmitter lock control is pressed, or

after 25 seconds of illumination.

The inside lights will not turn off if:

they have been turned on with the dimmer control, or

any door is open.

The battery saver will shut off the interior lamps after several minutes if
they are left on accidentally.

3

2

1

5

4

CIMS #1258992

com_illuminate.fly-ran

itdseq=80

art=f12dr029_a

REVIEW COPY ——
2006 B-Series (mbs), Owners Guide (post-2002-fmt) (own2002)Market: USA (fus)

PAGE: 59 OP: root EDIT SESSION: DATE: SEPT 15 2005 at 8:21 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_og

Locks and Security

59

Detailed Information for 2006 Mazda B3000 Truck B Series Truck Owners Manual

Lists of information found in 2006 Mazda B3000 Truck B Series Truck Owners Manual - Page 59

  • 1. Ensure the vehicle is electronically unlocked.
  • 2. Put the key in the ignition.
  • 3. Turn the key from the 2 (LOCK) position to 3 (OFF).
  • 4. Cycle eight times rapidly (within 10 seconds) between the 3 (OFF) position and 4 (ON).
  • 5. The doors will lock, then unlock, to confirm that the programming mode has been activated.
  • 6. Within 20 seconds press any button on the remote entry transmitter.
  • 7. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.
  • 8. Repeat Step 6 to program each additional remote entry transmitter.
  • 9. Turn the ignition to the 3 (OFF) position after you have finished programming all of the remote entry transmitters.
  • the ignition switch is turned to the ON position, or • the remote transmitter lock control is pressed, or • after 25 seconds of illumination.
  • they have been turned on with the dimmer control, or • any door is open.

Related Documents for 2006 Mazda B3000 Truck B Series Truck Owners Manual