Inspecting engine oil level- Page 316

Maintenance

8-18

t

Inspecting engine oil level

1. Be sure the vehicle is on a level sur-

face.

2. Warm up the engine to normal operat-

ing temperature.

3. Turn if off and wait a few minutes for

the oil to return to the oil pan.

4. Set the parking brake fully and make

sure that the gearshift is securely
latched in P (Park) (automatic trans-
mission) or 1 (First) (manual trans-
mission).

5. Open the hood. Protect yourself from

engine heat.

6. Pull out the dipstick, wipe it clean,

and reinsert it fully. Refer to Engine
Compartment Overview for dipstick
location.

7. Pull it out again and examine the level.

It’s OK if it’s within the crosshatched
area.

But if it’s near or at the bottom of the
crosshatched area, add enough oil to
bring the level to MAX (2.5L) or
FULL (3.0L/4.0L).

It may be necessary to add some oil
between oil changes. Make sure you
use a certified engine oil of the pre-
ferred viscosity. Your vehicle’s war-
ranty coverage may not apply if
engine damage is caused by the use of
improper engine oil.