2004 Mazda B Series; Owners Guide (post-2002-fmt); WARNING: Always wear the safety belt. Do not be tempted to- Page 75

2004 Mazda B4000 Truck B Series Owners Manual2

Model Year
2014 Dodge Charger SRT Owner Manual
background image

WARNING: Always wear the safety belt. Do not be tempted to
sit on top of the belt to fool police or to defeat the warning
system. The safety belt and safety belt warning system are
there to protect your life.

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, the BeltMinder will be disabled for that ignition cycle
only.

Deactivating/activating the BeltMinder feature

Read steps 1 - 9 thoroughly before proceeding with the
deactivation/activation programming procedure.

The BeltMinder feature can be deactivated/activated by performing the
following procedure:

Before following the procedure, ensure that the following conditions are
met:

•

The parking brake is set.

•

The gearshift is in P (Park) (automatic transmission) or the neutral
position (manual transmission).

•

The ignition switch is in the OFF position.

•

All vehicle doors are closed.

•

The driver’s safety belt is unbuckled.

•

The parklamps/headlamps are in OFF position (If vehicle is equipped
with Autolamps, this will not affect the procedure).

WARNING: To reduce the risk of injury, do not
deactivate/activate the Belt Minder feature while driving the
vehicle.

BeltMinder activation and deactivation procedure

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT

START THE ENGINE.)

2. Wait until the safety belt warning light turns off. (Approximately 1–2

minutes.)

•

Steps 3–5 must be completed within 60 seconds or the procedure will
have to be repeated.

2004 Mazda B Series

(mbs)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

75

Detailed Information for 2004 Mazda B4000 Truck B Series Owners Manual2

Lists of information found in 2004 Mazda B4000 Truck B Series Owners Manual2 - Page 75

  • 1. Turn the ignition switch to the RUN (or ON) position.
  • 2. Wait until the safety belt warning light turns off.
  • The parking brake is set.
  • The gearshift is in P (Park) (automatic transmission) or the neutral position (manual transmission).
  • The ignition switch is in the OFF position.
  • All vehicle doors are closed.
  • The driver’s safety belt is unbuckled.
  • The parklamps/headlamps are in OFF position (If vehicle is equipped with Autolamps, this will not affect the procedure).
  • Steps 3–5 must be completed within 60 seconds or the procedure will have to be repeated.

Related Documents for 2004 Mazda B4000 Truck B Series Owners Manual2