Tilt ; Cruise ; Always check the Owner’s Manual for more operating information and safety features - Page 5

G E T T I N G   S T A R T E D

Always check the Owner’s Manual for more operating information and safety features 

Steering-
wheel 
audio 
controls

To increase/
decrease 
volume: 
Press (

4

).

Press (

5

) to either mute standard

Audio system or activate
Navigation Voice Command*.
Press (

6

) to select AM, FM 1, 

FM 2 and CD mode.
Radio: Press 

(

7

) less than

one second to select next/previous
preset station, press 

(

7

)

more than one second until beep 
sound is heard to seek next/ 
previous station.
CD: Press    (

7

) to select next

track, press    (

7

) to repeat 

current track.

/

/

Getting
Started

Getting
Started

Tilt 
steering-
wheel 
release lever

Pull lever (

8

) down

to unlock column
and pull up to 
lock column.

WARNING: Do not adjust 
steering-wheel while driving
because you may lose control
of the vehicle. 

AUTO*

= With ignition switch 

in ON position; headlights and 
exterior lights automatically 
turn ON/OFF depending on 
surrounding darkness/lightness;
rotate knob (

1

) to third notch

= Fog lights* on: Rotate (

2

);

functions only with low 
beams on
Turn signals right/left: move 
lever up/down.

Cruise 
control

Operates 
above 
19 mph.
Press ON/OFF
switch (

1

) to

enable/disable.

To set speed: Press switch (

2

) 

down and release.
To increase set speed: Push 
switch (

2

) up and release 

at desired speed.
To decrease set speed: Press
switch (

2

) down and release 

at desired speed.
To cancel: Tap brake or press
CANCEL switch (

3

).

Turn signal/lighting 
control lever

OFF

= Lights off
= Tail, parking and 

dashboard lights on: Rotate 
knob (

1

) to first notch

= Tail, parking, 

dashboard and headlights on:
Rotate knob (

1

) to second notch

High beams on/off: Push 
forward/pull back to detent.
To flash high beams: Pull back
slightly and release.

Rear window wiper/washer 

To activate rear interval wiper:
Rotate knob (

4

) up to INT.

To activate rear normal speed
wiper: Rotate knob (

4

) up to ON.

To activate rear washer: Rotate 
knob (

4

) to

and release.

Wiper/washer control lever

Single wipe: Push lever up.
Washer: Pull back, also operates wipers.
Intermittent wiper: One click down.
To change interval speed: Rotate
inner ring (

3

).

Normal wiper speed: Two clicks down.
High-speed wiper: Three clicks down.

*Denotes optional equipment

2

1

AUTO

REAR

4

3

MIST

PULL

8

3

1

ON OFF

CANCEL

RES/+

SET/–

2

5 6

VOL+

–

MODE

4

7