See Owner’s Manual ; Blind Spot Monitoring; Detection - Page 3

G E T T I N G   S T A R T E D

Always check the Owner’s Manual for more operating information and safety features 

Bluetooth
Hands-Free
Telephone
(HF/TEL)*

System consists
of Hands-Free
Telephone
(HF/TEL) button
(

1

) located on

steering-wheel, information display,
microphone and audio/navigation
system*; system only functions
with a Bluetooth type mobile 
telephone, a mobile telephone
can be programmed only when
vehicle is parked.

Hands-Free Telephone setup
Pair a phone

1. Press telephone button (

1

); 

say 

“setup.”

2. System prompts you with available

options; say 

“pairing options.”

BSM warning 
light (

1

) will

appear in 
either outside
side-mirror 
when a vehicle 
is detected in the
detection area.

Tip: Audible warning beep 
is heard when turn signal 
is activated and a vehicle is
detected in the detection area.
WARNINGS: Do not rely 
completely on BSM system;
make sure to look over your
shoulder before making any
lane change.
BSM system may not function
normally when towing a 
trailer, system should 
be deactivated.

Getting
Started

Getting
Started

Language

Press telephone button (

1

); 

say 

“setup”

after beep, say 

“language”

after beep, say 

“English,”

“French” or “Spanish,”

you will be

asked 

“is this correct,”

say 

“yes”

after the beep, then follow any
additional prompts.

Dialing a phone number

Press telephone button (

1

); say 

“dial”

after beep, slowly say phone number
after the prompt, system verifies
number is correct; then connects
your call.

Redialing last-called number

Press telephone button (

1

); say

“redial”

after beep, system will

redial last dialed phone number. 

See Owner’s Manual 
for complete operating
instructions and warnings.

Blind Spot Monitoring
(BSM)*

BSM system will assist driver 
by monitoring detection areas 
on either side of vehicle to 
the rear.
System is only active above 
20-mph. 

3. After prompts, say 

“pair a phone.”

4. System will request a 4-digit 

PIN of your choice (record PIN 
number for future phone pairing
procedure), slowly say your 
4-digit PIN and confirm. 

5. After prompt, follow phone 

manufacturer’s instructions to 
search for Bluetooth device.

6. Once device is found, select 

“Mazda,”

enter your selected 

4-digit PIN on phone’s numeric 
keypad when requested.

7. System prompts you to name 

the phone. 

8. System will ask for a phone 

priority number between 1-7, 
1 being highest.

9. When programming is complete,

system will indicate

“pairing 

complete.”

*Denotes optional equipment

1

Detection 

Areas

VOL+

–

MODE

1

Deactivating 
BSM system: 
Press BSM OFF
switch (

2

),

indicator will 
illuminate 
in instrument 
cluster. 

Press BSM OFF switch again 
to reactivate system.
Indicator light flashes if system 
has a malfunction, dealer 
inspection required.

See Owner’s Manual 
and BSM Quick Start Guide
for complete operating
instructions and warnings.

BSM

OFF

BSM

OFF

2