Always check the Owner’s Manual for more operating information and safety features ; 4. Rear interior light; 5. Hands-Free Telephone/- Page 8

M I R R O R S / W I N D O W S

Always check the Owner’s Manual for more operating information and safety features 

4. Rear interior light
5. Hands-Free Telephone/

navigation microphone*

6. Storage/sunglasses holder
7. Moonroof tilt switch*

One-touch operation: 
Tilt open/close, push/pull 
down switch.

8. Moonroof slide switch*

One-touch operation: 
Slide open/close, press
rear/front of switch.

Tip: With all doors closed,
moonroof and front windows
can be opened via Keyless
entry by pressing and holding
unlock button, or opened/
closed by turning and holding
driver’s door key toward 
front/rear of vehicle.

9. Cargo light 

DOOR = Light on with
liftgate open
OFF = Light always off

Mirrors/

Windows

Interior

Lights

1. Map/reading light switch

Press on/off.

2. Interior light switch

OFF = Light always off
DOOR = Light on when door open
ON = Light always on

Tip: All interior lights can 
be turned ON/OFF using 
driver’s overhead switch
when all light switches 
are in DOOR position.

3. Front interior light

Power window switches

With ignition ON. 
All windows controlled from 
driver’s armrest; passenger doors
have separate switches.

Front window switches 

One-touch down/up: Press/pull
AUTO switch (

3

) firmly and release,

window goes down/up all the way,
press/pull briefly to stop, press/pull
lightly and hold for normal operation,
momentarily press front power
window switches, front windows
will open to vent position.

Tip: During closing front window
operation, front window will
stop and open partway if object
blocks window operation.

Rear window control switches

Push/pull (

4

) to open/close.

Power window lockout switch

Press button (

5

), only driver’s 

window operates; press again 
for normal operation.

Power window 
initialization procedure

If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function until initialization
is complete.
Initialization procedure:
1. Turn ignition switch to “ON”  

position.

2. Make sure power window 

lockout switch on driver’s 
door is not depressed.

3. Press power window switch 

down and fully open window.

4. Pull switch up and fully close 

window, continue holding 
switch up for about 2 seconds 
after window is fully closed.

5. Repeat Steps 3 and 4 for 

each front window.

6. Confirm power window 

switch operation.

Dual power mirrors

Ignition switch must be in ACC 
or ON position.
To adjust left/right mirror: Press
selector (

1

) left/right, press (

2

) in

direction of desired movement.

Tip: To lock mirrors in place,
move switch (

1

) to center position.

AUTO

AUTO

5

R

L

4

3

2

1

OFF

ON

1

5

2 6 1

8 7

3

3

OFF

ON

DOOR

4

2

OFF

DOOR

9

*Denotes optional equipment