When Driving; How to change the set vehicle speed; To accelerate/decelerate using the SET- Page 240

NOTE



The distance-between-vehicles differs depending on the vehicle speed, and the slower the
vehicle speed, the shorter the distance.



When the ignition is switched to ACC or OFF and then the engine is started again, the
system automatically sets the distance-between-vehicles to the previous setting.

How to change the set vehicle speed

To accelerate/decelerate using the SET
switch

When you press the SET  switch, the
vehicle accelerates and when you press the
SET  switch, it decelerates.

Short press

1 km/h (1 mph)

Long press

10 km/h (5 mph)

NOTE

For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).

To increase speed using accelerator
pedal

Depress the accelerator pedal and press
and release the SET  switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.

CAUTION

The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE



The setting speed can be changed by
operating the SET  switch or SET
switch during stop hold control.



When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.



While depressing the accelerator pedal,
the color of the MRCC with Stop & Go
function indication changes from green
to white.

Canceling the system

If any of the following operations is done,
the MRCC with Stop & Go function
cancels temporarily, the MRCC with Stop
& Go function set indication (green)
switches to the MRCC with Stop & Go
function main indication (white), and the
MRCC with Stop & Go function set
indicator light (green) turns off at the same
time.



The OFF/CANCEL switch is pressed.



The brake pedal is depressed.



The electric parking brake (EPB) is
applied.



The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.



Any of the doors is opened.

When Driving

i-ACTIVSENSE

4-110

CX-3_8JL1-EA-20G_Edition1_old

2020-5-22 15:31:00