Turn and Lane-Change Signals; Turn Signals; When Driving- Page 191

Turn and Lane-Change

Signals

The ignition must be switched ON to use
the turn and lane-change signals.

▼

Turn Signals

Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
 
If the indicator light continues to flash
after a turn, manually return the lever to its
original position.

Right turn

Left turn

Right lane change

Left lane change

OFF

The turn signal indicators in the
instrument cluster flash according to the
operation of the turn signal lever to show
which signal is working.
 

NOTE



If an indicator light stays on without
flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned
out.



A personalized function is available to
change the turn indicator sound volume.
(page 9-10)

▼

Lane-Change Signals

Move the lever halfway toward the
direction of the lane change

―

until the

indicator flashes

―

 and hold it there. It

will return to the off position when
released.

▼

Three-Flash Turn Signal

After releasing the turn signal lever, the
turn signal indicator flashes three times.
The operation can be cancelled by moving
the lever in the direction opposite to which
it was operated.

NOTE

The three-flash turn signal function can be
switched to operable/inoperable using the
personalization function.
Refer to Personalization Features on page
9-10.

When Driving

Switches and Controls

4-53

CX-5_8FN1-EA-16L_Edition2

2017-2-9 12:40:26