Red Coolant Temp Light; Blue Coolant Temp Light; Check Fuel Cap- Page 4

2012 Mazda Mazda2 Smart Start Guide

Model Year
2014 Dodge Charger SRT Owner Manual
background image

5

6

FUEL  

GAUGE

TACHOMETER

SPEEDOMETER

DASHBOARD 

ILLUMINATION

1

 

GLOSSARY OF WARNING AND INDICATOR LIGHTS

 

 

NOTE:

 

See Owner’s Manual for more details and explanations.

SHIFT LEVER  

POSITION INDICATOR

  

(AUTOMATIC TRANSMISSION ONLY)

1

 When the headlight switch is in the 

 or 

 position, rotate the knob to adjust the brightness of   

  the dashboard lights.

Instrument Cluster

2

 â€˘ Push to toggle between odometer and trip meter (A & B).

  â€˘ When a trip meter is selected, push and hold to reset to zero.

ODOMETER/ 

TRIP METER

NOTE:

 

Low ambient temperature and or high altitude causes tire pressures to drop 

and may turn the TPMS warning light on. If the warning light comes on, check the tire 

pressure and fill the tires as soon as possible, preferably before moving the vehicle  

and warming up the tires. Tire pressure should be checked when the tires are cold.

ODOMETER/ 

TRIP METER 

SELECTOR

2

 

ENGINE COOLANT TEMP LIGHTS  

Since this vehicle does not use an engine 
coolant temperature gauge, red and  
blue engine coolant temperature lights  
are used to indicate high and low  
coolant temperature.

Red Coolant Temp Light

 

Flashing:

 Engine is starting to run hot. 

Drive slowly to reduce engine load.  

On:

 Engine is overheating. Safely pull 

over to the side of the road and turn the 
engine off.  
Refer to the Owner’s Manual for  
more information.

Blue Coolant Temp Light

 

On:

 Engine coolant is cold and  

no warm air is available for  
heater/defroster.  

Off:

 Engine coolant is warm and warm 

air is available for heater/defroster.  
The light may stay on for a few minutes 
after start-up when the engine is cold, 
but the vehicle can be driven with the 
light on or off.

 

 

Check Fuel Cap

 

 

Traction Control System  

(TCS)/Dynamic Stability  

Control (DSC)

 

On:

 TCS/DSC malfunction  

Flashing:

 TCS/DSC operating

 

 

Tire Pressure  

Monitoring System  

(TPMS

) Warning Light

 

On/Warning Beep:

 Low tire  

pressure in one or more tires.  

Flashing:

 TPMS Malfunction

 

 

Turn Signals/Hazard  

Warning Indicator Lights

 

 

Power Steering Malfunction

 

 

Headlight High Beams On

 

 

Brake Warning Light

 

Parking brake on/low brake  

fluid/malfunction

 

 

 Malfunction Warning Light

 

 

Check Engine Light

 

 

Security Indicator Light

 

 

ABS (Antilock Brake  

System) Malfunction

 

 

Air Bag/Front Seat Belt 

Pretensioner System 

Malfunction

 

 

Low Engine Oil Pressure

OFF

 

 

Dynamic Stability Control 

(DSC)/Traction Control System 

(TCS) Off Indicator Light

 

DSC OFF switch pushed and  
TCS/DSC turned off.

 

 

Charging System Malfunction

 

 

Door/Liftgate Ajar

 

 

Driver Seat Belt  

Unbuckled/Malfunction

 

 

Shift Position Indicator Light 

(Automatic Transmission only)

O/D

OFF

 

 

Overdrive Cancel Indicator

 

Illuminates when overdrive is off.

 

 

Cruise Main Indicator Light  

On (

AMBER

)/Cruise Set 

Indicator Light On (

GREEN

)

 NOTE:

 

Cruise control will cancel  

 

if speed drops 9 mph below set  

 

speed. This may happen when    

 

cruising on a steep upgrade.

FUEL GAUGE:

If the lowest scale mark and 
the E is flashing, this indicates 
the fuel level is low. Refuel as 
soon as possible.

If only the E is flashing, this 
indicates the fuel tank is nearly 
empty. Refuel immediately.

www.MazdaUSA.com

Detailed Information for 2012 Mazda Mazda2 Smart Start Guide

Lists of information found in 2012 Mazda Mazda2 Smart Start Guide - Page 4

  • Push to toggle between odometer and trip meter (A & B).
  • When a trip meter is selected, push and hold to reset to zero.

Related Documents for 2012 Mazda Mazda2 Smart Start Guide