Owner Maintenance; Body Lubrication; Maintenance and Care- Page 260

8-22

Maintenance and Care

Owner Maintenance

Form No. 8S18-EA-03I

Inspect fluid level in the washer fluid 
reservoir; add fluid if necessary.

To inspect the washer fluid level in the 
front reservoir, pull off the cap. Then, 
holding your thumb over the hole in the 
center of the cap, lift it straight up. The 
fluid level can be seen from the fluid 
column in the pipe. Add fluid if necessary.

Use plain water if washer fluid is 
unavailable. But use only washer fluid in 
cold weather to prevent it from freezing.

All moving points of the body, such as 
door and hood hinges and locks, should 
be lubricated each time the engine oil is 
changed. Use a nonfreezing lubricant on 
locks during cold weather.

Make sure the hood

’

s secondary latch 

keeps the hood from opening when the 
primary latch is released.

NOTE

Front and rear washer fluid is supplied 
from the same reservoir.

Body Lubrication

J48C_8S18-EA-03I_Edition3.book  Page 22  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI