Owner Maintenance; Maintenance and Care- Page 263
2004 Mazda MAZDA3 4-Door Mazda3 Owners Manual
Table of Contents
8-25
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
2. Pull down the blade rubber and slide it
out of blade holder.
3. Remove the metal stiffeners from the
blade rubber and install them in new
blades.
4. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
Pull out
Stiffener
•
Don
’
t bend or discard the stiffeners.
You need to use them again.
•
If the metal stiffeners are switched,
the blade
’
s wiping efficiency could
be reduced.
So don
’
t use the driver
’
s side metal
stiffeners on the passenger
’
s side, or
vice versa.
•
Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was
in the old blade rubber.
CAUTION
J48C_8S18-EA-03I_Edition3.book Page 25 Monday, February 9, 2004 8:41 PM
Black process 45.0
°
240.0 LPI
Detailed Information for 2004 Mazda MAZDA3 4-Door Mazda3 Owners Manual
Lists of information found in 2004 Mazda MAZDA3 4-Door Mazda3 Owners Manual - Page 263
- 2. Pull down the blade rubber and slide it out of blade holder.
- 3. Remove the metal stiffeners from the blade rubber and install them in new blades.
- 4. Carefully insert the new blade rubber.
- 3.book Page 25 Monday, February 9, 2004 8:41 PM Black process 45.
- Don ’ t bend or discard the stiffeners.
- If the metal stiffeners are switched, the blade ’ s wiping efficiency could be reduced.
- Be sure to reinstall the metal stiffeners in the new blade rubber so that the curve is the same as it was in the old blade rubber.
Related Documents for 2004 Mazda MAZDA3 4-Door Mazda3 Owners Manual
All trademarks are property of their respective owners. Tightrope
Interactive