Owner Maintenance; Maintenance and Care; Replacing a fog light bulb*- Page 277

8-39

Maintenance and Care

Owner Maintenance

Form No. 8S18-EA-03I

6. Replace the bulb.

7. Install the new bulb in the reverse order 

of removal.

Replacing a fog light bulb*

1. Turn the screw counterclockwise and 

remove it and partially peel back the 
mudguard.

2. Turn the socket and bulb assembly 

counterclockwise and remove it. 
Carefully remove the fog light bulb 
from its socket in the reflector by 
gently pulling it straight backward out 
of the socket.

3. Disconnect the bulb from the electrical 

connector by pressing the tab on the 
connector with your finger and pulling 
the bulb upward.

4. Install the new bulb in the reverse order 

of removal.

Front turn signal lights/Side-marker 
lights

Due to the complexity and difficulty of 
the procedure, the bulbs should be 
replaced by an Authorized Mazda Dealer.

NOTE

•

To replace the bulb, contact an 
Authorized Mazda Dealer.

•

Use the protective cover and carton 
for the replacement bulb to dispose 
of the old bulb promptly and out of 
the reach of children.

•

When reinstalling the sealing cover, 
make sure 

 faces up.

NOTE

To replace the bulb, contact an 
Authorized Mazda Dealer.

Socket

Tab

*Some models.

J48C_8S18-EA-03I_Edition3.book  Page 39  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI