Owner Maintenance; Maintenance and Care; Side turn signal lights- Page 278

8-40

Maintenance and Care

Owner Maintenance

Form No. 8S18-EA-03I

Side turn signal lights

1. Slide the unit as shown in the figure to 

remove it.

2. Detach the electrical connector from 

the unit by pulling it to the rear.

3. Install the new side turn signal unit in 

the reverse order of removal.

Brake lights/Taillights, Rear turn signal 
lights (4 Door)

1. Pull the center of each plastic retainer 

and remove the retainers and the trunk 
end trim.

2. Pull the center of each plastic retainer 

and remove the retainers and partially 
open the trunk side trim.

3. Turn the socket and bulb assembly 

counterclockwise and remove it.

NOTE

Bulb replacement is not possible 
because it is built into the unit. Replace 
the unit.

Removal

Installation

Trunk end trim

Trunk side trim

Removal

Installation

J48C_8S18-EA-03I_Edition3.book  Page 40  Monday, February 9, 2004  8:41 PM

Black process 45.0

°

 240.0 LPI