Owner Maintenance; Maintenance and Care; Front side-marker lights (With halogen - Page 446

6–48

Maintenance and Care

Owner Maintenance

   4.   Turn the socket and bulb assembly 

to remove it. Carefully remove the 
bulb from its socket in the refl ector by 
gently pulling it straight backward out 
of the socket.

   5.   Install the new bulb in the reverse order 

of the removal procedure.

  Daytime running lights/Parking lights 
(With xenon fusion headlights)

    Due to the complexity and diffi culty of 
the procedure, the LED bulbs must be 
replaced by an Authorized Mazda Dealer.

   NOTE

  LED bulb replacement is not possible 
because it is built into the unit. Replace 
the unit.

  Front turn signal lights, Parking lights/
Front side-marker lights (With halogen 
headlights), Front side-marker lights 
(With xenon fusion headlights)

     1.   If you are changing the right bulb, start 

the engine, turn the steering wheel all 
the way to the left, and turn off engine. 
If you are changing the left bulb, turn 
the steering wheel to the right, and turn 
off engine.

   2.   Make sure the headlight switch is off.

   3.   Pull the center of each plastic retainer 

and remove the retainers.

Removal

Installation

   4.   Turn  the  screw  counterclockwise  and 

remove it, and then partially peel back 
the mudguard.

   5.   Turn the socket and bulb assembly 

counterclockwise and remove it.

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD