Owner Maintenance; Maintenance and Care; Rear turn signal lights- Page 450

6–52

Maintenance and Care

Owner Maintenance

   4.   Disconnect the bulb from the socket.
   

Rear turn signal lights

Brake lights/Taillights/Rear side-
marker lights (Bulb type)

   5.   Install the new bulb in the reverse order 

of the removal procedure.

   6.   Insert the cover tabs and install the 

cover.

   NOTE

  Verify that the cover is securely installed.

    (Right  side)

      1.  Make  sure  the  ignition  is  switched  off, 

and the headlight switch is off.

    2.  Turn the knob and remove the cover.

    3.  Turn the wing bolt and jack screw 

counterclockwise.

    4.  Remove  the  jack
    5.  Turn the socket and bulb assembly 

counterclockwise and remove it.

/C\FCA&('#*A'FKVKQPKPFD

/C\FCA&('#*A'FKVKQPKPFD