Owner Maintenance; Maintenance and Care- Page 480

10. Turn the jack screw in the direction

shown in the figure.
 

11. Turn the wing bolt completely to

secure the jack.

NOTE

If the jack is not completely secured, it
could rattle while driving. Make sure
the jack screw is sufficiently tightened.

12. Install the cover in the reverse order of

the removal procedure.

13. Insert the cover tabs and install the

cover.

Tabs

NOTE

Verify that the cover is securely
installed.

Reverse lights

4–Door

1. Make sure the ignition is switched off,

and the headlight switch is off.

2. Pull the center of each plastic retainer

and remove the retainers.

3. Peel back the trunk lid trim.

Removal

Installation

4. Disconnect the electrical connector

from the bulb by pressing the tab on
the connector with your finger and
pulling the connector.
 

5. Turn the socket and bulb assembly

counterclockwise and remove it.

Maintenance and Care

Owner Maintenance

6-52

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21