If Trouble Arises; Flat Tire- Page 508

CAUTION

Align the notch on the wheel cover with
the valve stem when installing it.
 

Tire valve

Notch

Damage could occur during
installation if the wheel cover is not
properly aligned.

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but do
not remove any lug nuts until the tire
has been raised off the ground.
 

3. Place the jack on the ground.

4. Turn the jack screw in the direction

shown in the figure and adjust the jack
head so that it is close to the jack-up
position.
 

Jack head

5. Place the jack under the jack-up

position closest to the tire being
changed with the jack head squarely
under the jack-up point.
 

Jacking position

If Trouble Arises

Flat Tire

7-8

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21